Parametric analysis of hybrid amplifiers (edfa and raman amplifier) on 40gbps on 8 users wdm system
International Journal of Development Research
Parametric analysis of hybrid amplifiers (edfa and raman amplifier) on 40gbps on 8 users wdm system
Received 25th April, 2017; Received in revised form 19th May, 2017; Accepted 16th June, 2017; Published online 31st July, 2017
Copyright ©2017, Randeep Kaur and Dr. Deep Kamal Kaur Randhawa. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
To fulfill the need of higher bandwidth, increased number of users, increased speed of communication of current users, the WDM and fiber optic concept was developed. WDM stands for wavelength division multiplexing where many input signals are combined together and transfers as a single input. Multiplexing and de-multiplexing concepts are used in WDM. WDM system consist of amplifiers that are used to increase the performance of the optical fiber system. This study give information about the working of Hybrid amplifiers i.e. EDFA (Erbium Doped Fiber Amplifier) and Raman Fiber amplifier on 40 Gbps on 8 users WDM system. Optisystem is used to do the simulation of the proposed work . The objective of this study is to analyze the various parameters of 40 Gbps WDM with 8 users. The result section shows the results such a system
